• English
  • Dansk
  • Suomi
  • Norsk Bokmål
  • Svenska

Soita numeroon 010 201 0490

IWAKI Nordic

The Heart of Industry

  • Kotisivu
  • Tuotteet
    • Prosessipumput
      • Muovivuoratut Magneettikytkinpumput
      • Magneettikytkinpumput Haponkestävästa Teräksestä
      • Tynnyripumput
      • Paineilmakäyttöiset kalvopumput
    • Annostelupumput
      • Sähkömagneettiset annostelupumput
      • Moottorikäyttöinen annostelupumppu
      • Hammaspyöräpumput
      • Annosteluyksikkö – vakio
      • Annostelupaneelit
      • Annostelukaapit
    • OEM pumppuja
      • Mäntäpumput
      • Kalvo-, vakuumi-, ja ilmapumput
      • Magneettikytkin hammaspyöräpumput
      • Paljepumput
      • Sähkömagneettiset kalvoannostelupumput
      • Magneettikytkin keskipakopumput
    • Järjestelmät
      • Vakioannostelukaapit
      • Turvakaapit
      • Mobiiliyksiköt
      • Prosessiyksiköt
      • Prosessilaitteet
      • Perusturvallisuus
      • Muovisäiliöt
    • Sekoittajat ja agitaattorit
      • Sekoittajat IBC- säiliöille ja tynnyreille
      • Sekoittajat vaihteella
      • Erikoissekoittimet
      • Telineet ja nostovälineet
    • Prosessin säätö
    • Elintarvike- ja lääketeollisuuteen
      • Muovisäiliöitä elintarvike- ja lääketeollisuuteen
    • ATEX pumput
      • ATEX hyväksytyt pumput
      • Yleinen | ATEX – Tuotteiden luokittelu ja ATEX-alueet
      • Yleinen | ATEX – Tuotteen merkintä
    • Technology & Tips
  • Lataukset
    • Videot
    • Prosessipumput
      • Esite
      • Käyttöohjeet
      • Tuottokäyrät
      • Varaosakuva
    • Annostelupumput
      • Esite
      • Käyttöohjeet
      • Varaosakuva
    • OEM pumppuja
      • Esite
      • Käyttöohjeet
      • Tuottokäyrät
      • Varaosakuva
    • Järjestelmät
  • Laatu & Huolto
    • Turvallisuus ja käytettävyys
    • Tyytyväisyystakuu
    • Luotettavuustakuu
    • Huolto
    • Sertifikaatit
  • Varasto
    • Repair & Service
  • Profiiili
    • Yhteystiedot
    • Mission Statement
    • Policy Statement on Conflict Minerals
    • Sustainable Development
    • Terms and Conditions
    • Sarjatuotantopumppuja juoma-automaatteihin
    • IWAKI Nordic Group
    • Uutiset
  • Yhteystiedot
    • Henkilöstö
    • Pohjola
    • Amerikka
    • Eurooppa
    • Aasia
    • Australia
Sinä olet täällä: Kotisivu / Home – Suomi / Tuotteet / Technology & Tips / In General | Safe Chemical handling

Safe Chemical Handling

The use of dangerous chemicals has received a lot of public attention, as it is essential for both people and the environment that chemicals are handled properly. Thus it has resulted in changed Danish legal requirements in the field of chemistry, which came into force in July 2019.

Dosing Cabinet with 3 IWAKI IX-B pumps

For companies that work with dangerous chemistry, the rules entail that the companies must prepare a so-called chemical APV as well as providing effective training and instruction of the employees working with chemistry.

This chemical APV is used for a systematic work environment review and forms the basis for corporate safety and health planning. Read more at at.dk (Danish Working Environment Authority).)

The Danish Working Environment Authority recommends that the companies use the ”STOP” principle (in order) to prevent employees being exposed to dangerous substances and materials. IWAKI can deliver the ’technical solutions’ solving the challenges of the dangerous chemicals.

The picture shows Tommy Ipsen from IWAKI Systems
presenting a dosing cabinet with 3 IWAKI IX-B dosing pumps.
Personnel and surroundings are protected against the
chemistry handled in the closed cabinets.

Working with chemicals

Technical Measures

In the Danish Working Environment Authority (DWEA) guide ’Working with substances and materials’ ”(Arbejde med stoffer og materialer)”* it is recommended in the section ’Technical Measures’ to ”encapsulate the dangerous substances or the whole process”. Furthermore DWEA mentions the possibility of ”a workplace redesign”.

substitute, technical measures, org. measures, personal protection

IBC storage unit for quick and safe replacement of IBC tanks
IWAKI’s mag-drive pumps are 100% dense and with our complete Systems solutions direct and dangerous contact with the chemical is avoided. This also applies to potential leakages and spillages to the surroundings. Thus, IWAKI can provide effective solutions for both personnel and the environment.

Solutions from IWAKI with pumps, pipes, tanks, etc. are resistant to the current chemistry, and with IWAKI’s vast experience in this specialty area, customers can be assured of always getting the optimal solution.

The solutions are designed to be safe, easy to operate, maintain and clean.

*: ”DWEA-guide C 1.3-3 updated June 2019”

With the IWAKI’s IBC storage unit (picture above)
customers get an easy, quick and safe solution
for IBC tank replacement. A buffer tank ensures
continuous operation during the exchange and
there is no spillage to the surroundings.

IWAKI Nordic Mission Statement

  • Prosessipumput
  • Annostelupumput
  • OEM pumppuja
  • Järjestelmät
  • Sekoittajat ja agitaattorit
  • Prosessin säätö
  • Elintarvike- ja lääketeollisuuteen
  • ATEX pumput
  • Technology & Tips
  • Videot
  • Prosessipumput
  • Annostelupumput
  • OEM pumppuja
  • Järjestelmät
  • Turvallisuus ja käytettävyys
  • Tyytyväisyystakuu
  • Luotettavuustakuu
  • Huolto
  • Sertifikaatit
  • Repair & Service
  • Yhteystiedot
  • Mission Statement
  • Policy Statement on Conflict Minerals
  • Sustainable Development
  • Terms and Conditions
  • Sarjatuotantopumppuja juoma-automaatteihin
  • IWAKI Nordic Group
  • Uutiset
  • Henkilöstö
  • Pohjola
  • Amerikka
  • Eurooppa
  • Aasia
  • Australia

Copyright © 2023 - Cookies- and privacy policy: EN DA FI SV NO