Dosing pumps – IX Series, Model C & D

ix-serien

High Turndown Ratio – Motor control adjusts the discharge and suction speeds to meet a full and accurate turndown ratio of 750:1
High Accuracy – Combined with precise motor control, an efficient valve design maintains accurate flow rates allowing a low cost, mechanically-driven diaphragm pump to achieve a high accuracy of ±1%
Energy Savings – Helical gears and return springs reduce power consumption by up to 70% compared to conventional motor-driven mechanical diaphragm metering pumps
High Compression Pump Head Design – A fixed stroke length maintains a high compression ratio in each stroke resulting in fast priming and no air-lock at any flow rate
Flexible, User-friendly Interface – The controller position can be ordered in 6 positions for operator convenience and ease of use after installation
Food and pharmaceutical industries – IX-C150S6 pumps are approved according to EC1935/2004 for use in the food industry and in the pharmaceutical industry.

Maximum discharge capacity is rated with clean water at ambient temperature at maximum discharge pressure. Output may increase as pressure decreases
Maximum viscosity :IX-C: 1000 cps IX-D: 300 cps (standard pumps – consult factory for higher viscosities)
Liquid temperature range: 0 -50°C (TC, TE type), 0-80°C (S6 type). No viscosity change. Non freezing. No slurry.
Operating temperature range: 0-50°C (Indoor use only)
Operating humidity range: 0-90% RH (Non-condensing in the controller)
Maximum dry suction lift is 6.5 ft. (2m).
Accuracy is not guaranteed at flows below 0.5GPH (2 LPH) for IX-D300S6, 0.26GPH (1 LPH) for IX-C150S6 or 0.11GPH (0.4 LPH) for IX-C060S6.
Pumps should always be shielded from direct exposure to the elements
Materials: PVDF or AISI316
Control: mA, batch, Profibus
Multi Voltage: 100-240V