Dosing Pumps — IX-B Series
IX-B Series – Metering pumps
High efficiency brushless motor driven diaphragm type metering pump
- Unique drive design:
The IX-B pumps use brushless DC (BLDC) motors to control the pump stroke speed. The efficiency of the BLDC motor provides a high power output in a small package and allows the IX-B pumps to achieve 45L/H discharge flowrates. - High Turndown Ratio:
The turndown ratio of the IX-B series improves to 1000:1 via stroke rate control by the BLDC motor. - High Accuracy:
The pumps are +-1% repeatable across most of the control range. Minimum flow of the IX-B series is 0.0075L/H. - Degassing valve unit design:
Due to the proprietary valve unit design the IX series pumps provides excellent degassing ability. The IX-B pumps retain this feature creating an entire pump line that will not gas lock and has no priming issues.
- Improved chemical resistance:
Liquid End materials in PVDF or SUS316, a highly chemical resistance material, and a choice of elastomers (FKM or EPDM). New is a non-elastomer, solid PTFE diaphragm providing optimal resistance to chemical gas penetration and better allround chemical resistance.
- Flexible installation:
The IX-B pumps unique design enables the pumps to be installed in various locations. The control unit can easily be repositioned by customers onsite. The pump base can also be relocated for PVDF models and wall mounted without any extra parts required. Tubing, threaded, flanged or union (Georg Fischer) connections are available as standard options providing easy installation for any application.
Specifications
| Model | Max flow l/h |
Max pressure MPa |
Power Consumption Watt |
Current Amps |
Connection Size |
Weight Kg | |
| IX-B007 | TC/TE | 0.0075 – 7.5 | 1.7 | 17W | 0.4A | R1/2 | 3.5 |
| IX-B007 | TC/TE | ½NPT | 3.5 | ||||
| IX-B007 | TC/TE | G3/4 | 3.5 | ||||
| IX-B007 | S6 | R3/8 | 4.5 | ||||
| IX-B007 | S6 | 3/8FNPT | 4.5 | ||||
| IX-B007 | TC/TE | 1.7 note1 | RTPI note2 | 3.5 | |||
| IX-B007 | TC/TE | 1.0 | DIN PN10 DN15 JIS, ANSI note3 | 3.7 | |||
| IX-B007 | S6 | DIN PN10 DN15 JIS, ANSI note3 | 6.0 | ||||
| IX-B015 | TC/TE | 0.015 – 15 | 1.0 | 17W | 0.4A | R1/2 | 3.5 |
| IX-B015 | TC/TE | ½NPT | 3.5 | ||||
| IX-B015 | TC/TE | G3/4 | 3.5 | ||||
| IX-B015 | S6 | R3/8 | 4.5 | ||||
| IX-B015 | S6 | 3/8FNPT | 4.5 | ||||
| IX-B015 | TC/TE | 1.0 note1 | RTPI note2 | 3.5 | |||
| IX-B015 | TC/TE | 1.0 | DIN PN10 DN15 JIS, ANSI note3 | 3.7 | |||
| IX-B015 | S6 | DIN PN10 DN15 JIS, ANSI note3 | 6.0 | ||||
| IX-B030 | TC/TE | 0.03 – 30 | 0.6 | 19W | 0.5A | R1/2 | 3.7 |
| IX-B030 | TC/TE | ½NPT | 3.7 | ||||
| IX-B030 | TC/TE | G3/4 | 3.7 | ||||
| IX-B030 | S6 | R3/8 | 5.0 | ||||
| IX-B030 | S6 | 3/8FNPT | 5.0 | ||||
| IX-B030 | TC/TE | 0.6 note1 | RTPI note2 | 3.7 | |||
| IX-B030 | TC/TE | 0.6 | DIN PN10 DN15 JIS, ANSI note3 | 3.9 | |||
| IX-B030 | S6 | DIN PN10 DN15 JIS, ANSI note3 | 6.5 | ||||
| IX-B045 | TC/TE | 0.045 – 45 | 0.4 | 19W | 0.5A | R1/2 | 3.7 |
| IX-B045 | TC/TE | ½NPT | 3.7 | ||||
| IX-B045 | TC/TE | G3/4 | 3.7 | ||||
| IX-B045 | S6 | R3/8 | 5.0 | ||||
| IX-B045 | S6 | 3/8FNPT | 5.0 | ||||
| IX-B045 | TC/TE | 0.4 note1 | RTPI note2 | 3.7 | |||
| IX-B045 | TC/TE | 0.4 | DIN PN10 DN15 JIS, ANSI note3 | 3.9 | |||
| IX-B045 | S6 | DIN PN10 DN15 JIS, ANSI note3 | 6.5 | ||||
note1: Use below the maximum allowable pressure of a connected tube.
note2: Please refer to pump identification.
note3: JIS 10K 15A, DIN PN10 DN15, ANSI 150Lb 1/2″.
- The above is the value at rated voltage, ambient temperature and clean water.
- Liquid temperature range: 0 -50°C (TC, TE) and 0 -80°C (SUS316) (No viscosity change. Non freezing. No slurry)
- Maximum viscosity: with standard valve up to 500 mpA•s / with viscous valve up to 1000 mPa•s.
- The pressure at which the abnormal pressure detection function operates is 1.3 to 2 times the maximum discharge pressure.
- Allowable voltage fluctuation: within ±10% of the rated voltage.
- Operating ambient temperature: 0-50°C
- Operating humidity range: 30-90% RH (Non-condensing in the controller)
- Flanges will be shared with the standards listed in the table.
- Maximum priming lift is 1-2m depending on model.
- High accuracy ±1% (it becomes ±0.3mL/h when it is set to 30 mL/h or less.
- Liquid end materials in PVDF or SUS316
- Controller options: analog, pulse, batch, profibus etc. (See brochure)